<rp id="7lvp7"></rp>

<track id="7lvp7"></track>

    <var id="7lvp7"><menuitem id="7lvp7"></menuitem></var>

    <ruby id="7lvp7"><mark id="7lvp7"><progress id="7lvp7"></progress></mark></ruby><ol id="7lvp7"></ol>

      攪拌車載泵常見幾點的保養辦法 首頁 > 平臺公告

      作者:百農機械網   發布日期:2019-12-09 12:24:22

      攪拌車載泵常見幾點的保養辦法

        二手攪拌車載泵的運用和保管過程中,因為機件磨損、天然腐蝕和老化等原因,其技術性能將逐漸變壞,有必要及時進行保養和修理。拌和車載泵保養的目的是康復混凝土泵車的正常技術狀況,堅持良好的運用性能和可靠性,延長運用壽命;減少油料和器材消耗;避免事端發生,保證行駛和作業安全,進步經濟效益和社會效益。下面和小編一起來了解拌和車載泵有哪些保養和保護辦法。
        拌和車載泵保養
        1.清潔車容整齊,發動機及各總成部件和隨車東西無污垢,各濾清器正常運用,液壓油、機油無污染,各管路四通八達。
        2.查看發動機和各總成、部件狀況正常。機件完全可靠,各連接、緊固件完好。
        3.緊固各緊固件有必要完全無損壞,安裝可靠,緊固程度符合要求。
        4.調整了解各部件調整的技術要求,依照調整的辦法、步驟,認真細致地進行調整。
        5.光滑依照不同地區和時節,正確挑選光滑劑種類,加注的油品和東西應清潔,加油口和油嘴應擦洗干凈,加注量應符合要求。
        拌和車載泵的保護
        1.底盤部分的保護底盤的查看主要有油、水的查看;離合器、變速器、輪胎的查看。
        2.分動箱及反轉減速機的保護定時三個月給反轉減速機構與反轉之承連接的小齒輪外表涂改光滑脂,定時通過加油座上的光滑嘴用油槍給反轉軸承加注光滑脂。
        3.泵送設備的保護設備泵送5000m3左右混凝土后,應注意查看眼鏡板與切開環間的空隙,若超過2mm,且磨損均勻,則應考慮調整空隙。
        4.液壓系統的保護清潔是液壓系統保護的重要工作。經常清洗才干保證系統沒有塵埃、贓物及其他顆粒。查看液壓軟管及接頭是否有滲漏油現象,若有損壞則有必要更換液壓軟管。
      Maintenance methods of mixing truck pump



      In the process of using and keeping the second-hand truck mounted agitator pump, its technical performance will gradually deteriorate due to wear, natural corrosion, aging and other reasons, so it is necessary to maintain and repair it in time. The purpose of mixing truck pump maintenance is to recover the normal technical condition of concrete pump truck, adhere to good operation performance and reliability, extend the service life, reduce oil and equipment consumption, avoid accidents, ensure driving and operation safety, and improve economic and social benefits. Let's learn about the maintenance and protection methods of the mixing truck pump together with Xiaobian.

      Mixing truck pump maintenance

      1. Clean the vehicle in order. The engine and all assembly parts and accompanying things shall be free of dirt. All filters shall be in normal operation. Hydraulic oil and engine oil shall be free of pollution. All pipelines shall be in all directions.

      2. Check whether the engine, assemblies and components are in normal condition. The parts are completely reliable, and all connections and fasteners are in good condition.

      3. It is necessary to fasten all fasteners without any damage. The installation is reliable and the fastening degree meets the requirements.

      4. Adjust and understand the technical requirements of each component adjustment, and adjust carefully according to the adjustment methods and steps.

      5. According to different regions and seasons, the type of smooth agent shall be selected correctly. The oil products and things to be filled shall be clean, the oil filler and nozzle shall be cleaned, and the filling amount shall meet the requirements.

      Protection of mixing truck pump

      1. The inspection of the protective chassis mainly includes the inspection of oil and water; the inspection of clutch, transmission and tire.

      2. The transfer case and reverse gear unit shall be protected for three months to apply smooth grease to the surface of the pinion connected with the reverse gear reducer and the reverse gear bearing, and the reverse bearing shall be filled with smooth grease regularly through the smooth nozzle on the oil filling base with an oil gun.

      3. After the protection equipment of the pumping equipment pumps about 5000m3 of concrete, pay attention to check the gap between the spectacle plate and the cutting ring. If the gap is more than 2mm and the wear is even, the gap should be adjusted.

      4. The protection and cleaning of hydraulic system is an important work of hydraulic system protection. Regular cleaning can ensure that the system is free of dust, dirt and other particles. Check the hydraulic hose and connector for oil leakage. If there is any damage, it is necessary to replace the hydraulic hose.

      相關資訊

      百農-讓每位客戶都能擁有更好的二手混凝土設備

      全國地區設備查詢:152-1114-2288(工作時間:全天24小時候機)

      性欧美小矮人_色视频www_a级韩国毛片_日本一日本黄_私人影院看片